Techlounge.com.au

Nobody wants to be caught out with no phone due to a dead battery. Replacement PDA battery to suit HTC Touch Pro HD, Touch HD T8282. Replaces HTC part number: BLAC160, 35H00120-01M, BA S340. Li-Ion battery has no “memory effect”, therefore it can be charged at any time without damage to the HTC Touch Pro HD, Touch HD T8282 battery. Fully compatible with your original HTC Touch Pro HD, Touch HD T8282 PDA and battery charger.

This HTC battery will ONLY replace the following HTC part numbers:
BLAC160
35H00120-01M
BA S340
Please ensure that your original HTC battery part number matches one of the above.

HTC Touch HD T8282 Battery

Volts: 3.7V
Capacity: 1350mAh
Battery Chemistry: Li-Ion
Compatability: HTC Touch Pro HD, Touch HD T8282
Aftermarket Product
Replaces HTC PDA part number: BLAC160, 35H00120-01M, BA S340

Get your HTC Touch P3450 Battery here

Having one of these Samsung F480 phones myself, I must say the battery life is not bad. But affter many months or years of usage, what used to be good battery life is no longer. If you’re finding the need to constantly recharge your phone, then your Samsung F480, Samsung F480v battery needs to be replaced.

Samsung F480, F480v Battery Specs

Volts: 3.7V
Capacity: 850mAh
Battery Chemistry: Li-Ion
Aftermarket battery
Replaces Samsung part numbers: AB553446CE, AB553446CEC, AB553446CUCSTD
Compatible with: Samsung F480, Samsung F480v, Tocco, Samsung F488

Accidents do happen but rest assured that you don’t need to fork out close to $1000 for a new iPhone and that there is a replacement iPhone 3G digitizer or cracked front glass panel available. No soldering is required for installation as a digitizer ribbon cable is included as part of the product. iPhone unassembly tools are recommended for ease of installation.

Please note that this is for the front glass panel and digitizer only for the iPhone 3G. It does not include the LCD display. Fits on all iPhone 3G models only. Not suitable for original 1st gen iPhone.

Cracked your iPhone 3GS screen? Mishaps happen but don’t buy a new phone, buy and install your own iPhone 3GS lcd screen. The LCD ribbon cable is included as part of the iPhone 3G LCD screen so no soldering is required for installation. iPhone 3GS unassembly tools are recommended for ease of installation.

iPhone 3GS replacement LCD screen. Fits iPhone 3GS models only and is not suitable for original 1st generation iPhone or iPhone 3G.

Accidents do happen but rest assured that you don’t need to fork out close to $1000 for a new iPhone and that there is a replacementiPhone 3G digitizer or cracked front glass panel available. No soldering is required for installation as a digitizer ribbon cable is included as part of the product. iPhone unassembly tools are recommended for ease of installation.

Please note that this is for the front glass panel and digitizer only for the iPhone 3G. It does not include the LCD display. Fits on all iPhone 3G models only. Not suitable for original 1st gen iPhone.

Replacement PDA battery to suit O2 XDA Zinc, ASUS MyPal P525, P526, P535, MyPal P735. Replaces O2/ASUS part number: SBP-06, XP-06, 07G016033459. Rated at 1450mah, it is slightly higher capacity than the original for a slight improvement in operating time. This is an aftermarket battery, but will be fully compatible with the O2 XDA Zinc, ASUS MyPal P525, P526, P535, MyPal P735 PDA and battery charger. Battery has no “memory effect”, therefore it can be charged at any time without damage to the battery or the need to discharge it first. A direct replacement for your original O2 XDA Zinc PDA or ASUS MyPal battery or great as a backup/spare.

O2 XDA Zinc, ASUS MyPal P525, P526, P535, MyPal P735 Battery

Volts: 3.7V
Capacity: 1450mAh
Battery Chemistry: Li-Polymer
Compatability: O2 XDA Zinc, MyPal P525, MyPal P526, MyPal P535, MyPal P735
Aftermarket Product
Replaces O2/ASUS PDA part number: SBP-06, XP-06, 07G016033459

Tired of your XDA Atom running low on power? Get a new XDA Atom battery to give your PDA that much needed boost! Rated at 3200mah, this is a higher capacity that the original for an improvement in operating time. The XDA Atom Life high capacity battery will be thicker than the original, but comes with a battery back cover. Fully compatible with the O2 XDA Atom Life PDA and battery charger. No “memory effect”, therefore it can be charged at any time without damage to the o2 XDA Atom High Capacity Battery or the need to discharge it first. A direct replacement for your original O2 XDA Atom Life PDA battery or great as a backup/spare.

O2 XDA Atom Life Battery

Volts: 3.7V
Capacity: 3200mAh
Battery Chemistry: Li-Polymer
Compatability: O2 XDA Atom Life
Aftermarket Product
Replaces O2 PDA part number: AHL03715206, 603FS20152, 405433-001, HSTNH-F108, FA764AA

Order the XDA Atom High Capacity Battery @ Circuit Central

Cracked your iPhone 3G replacement LCD screen? Don’t worry, there are now replacement LCD screens for the DIY-er. Fits iPhone 3G models only and is not suitable for original 1st generation iPhone.

A perfect replacement for cracked or faulty iPhone 3G lcd screens. The LCD ribbon cable is included as part of the iPhone 3G LCD screen so no soldering is required for installation. iPhone 3G unassembly tools are recommended for ease of installation.

Can’t live without your iPod touch? If your Apple iPod Touch 1st Gen no longer holds its charge and needs constant recharging, replacement of the internal battery is required. Li-Ion Apple iPod Touch 1st Gen battery for your MP3 player replaces Apple part number: 616-0343, 616-0333, 07-001-01, LN3657361YGMB.Our iPod touch 1st gen batteries can be charged at any time without damage to the iTouch 1st Gen battery. (no memory effect). Unassembly tools included.

Order your iPod Touch 1st Gen battery at Circuit Central

XDA Flame PDA no longer holding its charge? Don’t be caught out with no power. Rated at 2000mah, it is a higher capacity than the original for a slight improvement in operating time. This is an aftermarket XDA Flame battery, but will be fully compatible with the O2 XDA Flame PDA and battery charger. A direct replacement for your original O2 XDA Flame PDA battery or great as a backup/spare.

O2 XDA Flame Battery

Volts: 3.7V
Capacity: 2000mAh
Battery Chemistry: Li-Polymer
Compatability: O2 XDA Flame
Aftermarket Product
Replaces O2 PDA part numbers: XP-08, 709FS00848, 30600320000057